uBitX Speaker Enclosure

This is a simple enclosure made to hold a standard 2 inch 8 ohm speaker for use with the uBItX transceiver. It includes a strain relief to support the cable connected to the speaker.

Print Settings

Printer Brand:

Robo 3D

Printer:

R1 ABS + PLA Model

Rafts:

Yes

Supports:

Doesn't Matter

Resolution:

0.2

Infill:

30%

Notes:

Printed in PLA

Post-Printing

The strain relief is printed separately and attached with 2 M3x12 self tapping screws (tight fit) The speaked is held into the enclosure with 4 dabs of hot glue around the perimeter. Use small plastic feet to relieve the screw heads underneath the strain relief.rnrnAlternatively you could glue the strain relief in, and omit the screws.

How I Designed This

Fusion 360