16 oz Mininuke coozie with cap

MiniNuke themed monster can coozie with cap and breakaway supports.

3-18 note. not sure why the thumbnails dont show. Thingiverse is just goofy.

The cap serves a double purpose. It covers the top to keep it clean and prevent contamination if you put an opened can in the fridge. it also serves as a spacer when you put it under the can to raise the can above the lip of the opening.

3/17 update. added a second version of the cap to be printed in TPU. A tighter fit that will prevent spills if you store an open can in the fridge. flip it upside down to print properly. it could be printed in PLA/PETG, but its tough to remove if it doesnt flex.

Print Settings

Supports:

Yes

Notes:

No supports are required. the base has breakaway supports that worked better than I had hoped. Make sure your bridge mojo is strong when you print the cap. I printed it in the orieantation of the export and it was perfect. You could also print it upside down and probably not need supports.

the main body top portion does need supports. again, it may do fine printed upside down. Category: Food & Drink