Prusa i3 MK2.5S/MK3S X carriage R7 with M3 heat set inserts

Prusa i3 MK2.5S/MK3S X carriage with M3 heat set inserts based on original R7 stl.

This model made for heat set inserts like in Voron Sourcing guides - M3x5x4 (https://aliexpress.ru/item/4000232858343.html or the same from another supplier)

To assemble with x-carriage-back_R7 you may use stock M3x10 screws or use M3x8

MK25S-MK3S+-x-carriage_R7_M3-heat-set-inserts  - universal for MK2.5S and MK3S/MK3S+

MK3S+-x-carriage_R7_M3-heat-set-inserts - only for MK3S/MK3S+. There is no hole for endstop block which uses in MK2.5S

I printed this model with glassfilled ABS GF-4 by Filamentarno on Original Prusa textured sheet.

UPD 20.08.2023 rev2: Fix the holes dimentions. Now the holes diameter 4.7mm instead of 4.6mm

• Holes for M3x5x4mm heat set inserts instead of hex nuts.
• No hole for endstop block screw in MK3 version.