Cr-10s Control Box 120mm Fan Conversion

This is my take on the control box silencing, i used x2 120mm noctua fans(700rpm). Print x2 of each model(Fan housing+Adapter) and fix the housings together with 4mm bolts, the adapter plate is then glued to the top(x1 on each housing).

I removed the power supply cover and cooling fan, the control box then sits on top of this, i powered both fans via the power supply fan socket.

Its worked great for me with no heat issues at all and has vastly reduces the noise from my control box.

Note: This mod involves modifying the power supply and its cooling and i must stress that 'YOU' are responsible for any mods you do on your printer.

I kept the board cooling fan(50mmx10mm), but removed the 20mmx20mm exaust fan from the control box.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

0.2

Infill:

Filament: Rigid ink PLA