3D Printed Chair/Stool/Table

These files were designed to work for people who have limited access to tools, but happen to have a 3D printer. A table/stool or a chair can be made from these files. All that is needed to make these are a 3D printer and filament, a Drill/screwdriver, a saw, and 4-6 dowels of either 1-1/8" or 1-3/8" sizes and finally some circular precut surfaces from Home Depot/Lowes (Available in 15" or 18" diameters)

Instructions:

1. Print four of the leg supports in either the 1-1/8" or 1-3/8" dowel sizes (sizes described in STL file names)
   1. Recommended to print files with high infill for additional print strength
2. Print supports for the chair back (only if you want to make a chair)
   1. Recommended to print files with high infill for additional print strength
3. Purchase 1-2 circular surfaces from Lowes/Home Depot (Available in 15"-18" sizes)
4. Purchase 4-6 dowels from Lowes/Home Depot (sizes should be 1-1/8" or 1-3/8", depending on which you prefer)
5. Purchase #6 screws  from Lowes/Home Depot (1.5" length screws will work)
6. Assemble your furniture with your assembled materials. Reference the posted photos for proper assembly. 
7. Enjoy!