Divot-Mix Bottle Holder for Golf Push Cart

You will need a 16mm long M3 socket head bolt and nut for assembly.

---

I love my push cart for carrying around my clubs while playing golf, however the downside is that you cannot usually carry around the divot mix found on most golf carts that can, and should, be used to fix your divots. See images here. Most golf courses will make these bottles available and I would like to be able to grab one, throw it on my cart, and go (rather than have my own bottle that I must refill at each course with their own mix).

I have a bagboy nitron push cart so have primarily designed this clip to fit on the receiving mount at the top of the cart near the handle (see pics for location). I will happily provide variations for other cart manufacturer's upon request or feel free to mix the model yourself.

I recommend using a cylinder modifier to print 100% infill near the bolt hole and also printing the clip itself with 100% infill so that the mounting area is as strong as possible. I printed the rest of the model in 15% gyroid infill using Prusament PETG. I have included gcode for printing on a prusa mini.

The cup is approx. 3.75" in dia at the base and is lofted by approx. 3° to allow for any size bottle, including an opening at the front for those bottles that have a handle.

I have test fit my 16oz yeti cup as well 😉