Case/Stand for LILYGO T5 4.7 inch E-paper Display

This is a case/stand I designed for my Lilygo 4.7" E-Ink display. I used a piece of the foam from the originally packaging in the back where the 18650 battery is housed in order to hold the board in place (see picture). Also the button on top has two supports designed in that you can remove after printing or just leave the in place as the case flexes a bit and still pushes the button. I'm using mine to display weather info so I only need the one button.

Parts:

• Two M3 x 14mm Screws
• Two M3 Nylon Insert Lock Nuts
• Four M3x8 Screws

Print Settings

Printer:

Custom i3 Plus

Rafts:

No

Supports:

No

Resolution:

0.3

Infill:

20

Filament: