citadel x-Series top

I have a Citadel paint handel and i whanted an extra paint handel, so i cum up with this.

this is the tops you need to print: https://www.printables.com/model/214733-minivice-x-series-modular-miniature-holder-paintin

I used a m6 nut and a 5x3mm neudimion magnet(the same as in the other) and thats it.

my settings in cura is:

0.15mm layer height

5 walls

no support

60mm/s print speed

8mm brim

25% infill