Destiny Logo Spinner

This is a Destiny Logo fidget spinner that I made for my boys. There are no weights added and only needs a 22mm x 7mm typical 608 skate bearing. To add weight you can print at 100% infill but the better the bearing the better it will spin (obviously). This is a perfect size for a kids hands.

Print Settings

Printer:

Maker Select Mini

Rafts:

Doesn't Matter

Supports:

No

Resolution:

0.2mm

Infill:

Anywhere form 20-100%

Notes:

I would not use supports because that would make removing the support material form the logos on the underside of the spinner and the caps hard. The logos are small enough where your machine should bridge it with little to no problem.