ITEM light 4040 2-way-connector

ITEM light 4040 2-way connector

This 2-way connector for 4040 profiles was designed for a DIY laser cutter project.

It easily connects two ITEM profiles to each other, which can be attached with two M8 x 20mm inner square screws.

(+) very precise and form-fitting

(+) no twisting of the profiles

(+) high stability if the infill is increased accordingly

(-) only ITEM light profiles, otherwise all positive points will get worse

Print Settings

Printer Brand:

MakerBot

Printer:

MakerBot Replicator 2X

Rafts:

Doesn't Matter

Supports:

Yes

Resolution:

0,2 mm

Infill:

min 20%

Notes:

The connector was printed in a resolution of 0.2mm to ensure the accuracy of the connection.

The infill was set to 20%, which has given a good stability, but can be increased as needed to get a higher stability.