Vesa Adapter for XR3501R/EX3501R/EX3203R

Here is a simple and strong mount for the BenQ Monitors where the adapter mount non longer works.

Used was a plate converter Vesa Plate (https://www.amazon.co.uk/Goobay-63267-VESA-Adapter-Mount/dp/B00GOI0WD2)

and 6 x M4 45mm bolts.

Printing is simple and the holes are slightly tight and add to some rigidity when bolted up.

Use the metal bracket on the old stand to line up drilling spots.

This is made thin to minimise distance to the main mount but it does mean you have to remember to place in the mount bolts before screwing down the vesa plate.

This was built as it is a heavy monitor and fully out of printed material would need a very highly supported print to ensure the layers are the right way. this does not in any way rely on the 3d part for strength other than compression.

Enjoy.

Print Settings

Rafts:

No

Supports:

Resolution:

0.28

Infill:

Filament: YOYI PETG Black Post-Printing =============