ADXL345 Sapphire Plus Mount

Designed up this mount so that the Direct Drive mount was not needed to be created with supports to add this as part of it.

Clears the belts when homed and acts as a cable guide for the included split cable cover.

Requires 2 new bolts to the tool head bracket as they are larger and 2 x 2.5mm bolts for the ADXL345.

Recess on the mount for the soldered pins and also chamfer on the bracket to accomodate the limit switch. Enough room for the additional cables too in the main cut out.

this is stable and does not shake easily making it a great mount.

Print Settings

Printer:

Sapphire Plus

Rafts:

Supports:

No

Resolution:

Infill:

100

Filament:

Blue