KINDLE PAPERWHITE STAND (with casing)

Inspired from Kpix :

https://www.thingiverse.com/thing:4642986

This is for the kindle paperwhite integrated in its casing (ie 13 mm thickness, i made provision for 13.5mm in the design)

Priting time 3 hours 36 minutes, 40 g of PLA with 12% of infill. It d work with less infill, especially if the top has 2 layers.

This works for the ipad too.

If i do a second version, i will slightly lower the front part as it's a bit too high and hiding a bit the ipad screen. Maybe adding 1 or 2 mm on the left or right for the kindle would be a good idea.