A500 PSU Adapter Plate

This allows the use of a Mean Well RT-50B power supply module in the A500 PSU enclosure without modification to the enclosure. Note that the 'pocketed' side goes towards the bottom enclosure half.

The green power resistors are not necessary.

You will need some wire to extend the stock leads to the RT-50B.

! Warning !

Do all disassembly and soldering with the unit unplugged from mains voltage!

The specific Amiga power supply this works with is:

Model Number:315503-01 (Verify your PSU model before printing)

(PSM-500)

Voltage/Current:

+5vdc @ 4.3A

12vdc @ 1A

-12vdc @ 0.1A

Print Settings

Printer Brand:

XYZprinting

Printer:

Rafts:

Doesn't Matter

Supports:

Resolution:

0.25mm-0.3mm

Infill:

Notes:

I used PLA but I suppose you could use any suitable filament.