BLTouch Home & Auto Levelling Height Gauge

BLTouch gauge block

Help set the 8.3mm height from the nozzle. I believe the newer Smart BL Touch has a 8.5mm distance, from shoulder to tip of probe.

Also see: BLTouch Home & Auto Levelling Height Gauge [Custom Height] https://www.thingiverse.com/thing:3632378

How to use it:-

See how I used this BL Touch Gauge, should link to this position of this adjust this video:- https://youtu.be/truJB5TqmoA?t=5m8s

See BL Touch getting adjusted, should link to this position of this adjust this video:- https://youtu.be/truJB5TqmoA?t=11m0s

BLTouch Home & AutoLevelling Classic (White colour)

https://www.indiegogo.com/projects/bltouch-auto-bed-leveling-sensor-for-3d-printers#/

BLTouch is an auto leveling sensor for 3D Printers based on open-source. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.

I has:-

Self-test : The push pin operates itself three times to test when the power is on.

Alarm : The LED light blinks if a problem found on a self-test or on an operation.

BLTouch consists of Atmel ATtiny13A, solenoid, and a push pin.

High-precision Type Sensor : Using Hall Effect

➡ Not optical, either proximity(inductive or capacitive) one. The BLTouch needs to be set at 8.3mm (+/-0.2) above the nozzle. I believe the newer Smart BL Touch has a 8.5mm distance, from shoulder to tip of probe.

This simple 3D Printable gauge should help you achieve this.

Remember that this BLTouch gauge block will need to be set onto a sheet of paper, (the distance of the nozzle tip above the print bed.

I do not own or have a BLTouch so I have not been able to test this BLTouch gauge block in a real world situation.

20% infill is OK with 4 layers top to prevent any infill bumps passing through to the top surface.

A light sanding to smooth the top could help, but keep checking the height of the BLTouch gauge block.

Print Settings

Printer:

Protomaker Black Sprint Original 3D Printer

Rafts:

Supports:

No

Resolution:

Infill:

20%

Notes: