Sculpfun S9 / S6 (Pro) Laser feet and height extender

This is my design of mounting feet and height extender for the Sculpfun S9.

I'm not sure, but I think it should work with the S6 (Pro) as well.

These are mounting feet including the possibility to increase the printer, depending on how high it needs to be.

The base increases it by 20 mm and can be screwed firmly onto a panel or into the housing accordingly. The laser then stands quite well in the holder due to its own weight and if you have a really well adjusted printer like me, the tolerances fit so extremely well that nothing will ever wobble here...

If you then have to increase the laser because of high components or the rotation module or whatever, you can do that very easily by making the spacers clean. Here I've kept it quite modular and you can just print 5, 10 or 20 mm spacers as you need.

Because of the mainboard it is not quite symmetrical you always need 3+1 sleeves (Extender + Extender vr).

With the base, you can set a 0,0 with the workpiece at the front left exactly to the minimum movement point using the Basis vl file. Basis hr and Basis hl are identical, Basis hr is for the front right and the mainboard.

Print Settings

Printer:

Caribou3D MK3S

Rafts:

Supports:

Yes

Resolution:

Infill:

40

Filament:

black