Quest Battery Pack Clips

Simple clips to attach 22mm thick round-ended-brick, and 22mm/33mm lipstick battery packs to the back of theOculus Quest head strap.

Features:

• Holds the battery away from your head!
• The brick-style clips use hair-ties or elastics so it does not rely on the springiness of plastic.(Important for PLA)
• The original one should work with any rectangular 22mm battery pack. Solbana/IKEA pack shown
• Added a versions for 22mm/33mm lipstick chargers

Stuff I bought:

• These braided cables are perfect!
• These Anker PowerCore Mini+ 3350 lipstick style chargers should fit the 22mm clips and are the smallest that I would recommend bothering with.
• These Anker PowerCore 5000 lipstick style chargers should fit the 33mm clips.
• These Anker PowerCore 10000 very much like the Solbana that I use and should fit in the 22x60 clip. This one is cheaper than then next one because it does not haveUSB-C Power Delivery support.
• These 10,000mAh Anker PowerCore 10000 PD are popular andshould fit in the 25x50 clip.
• And, finally, these Anker PowerCore 13000 work pretty well, but are a little large, but they fit the 22x60mm clip.

*Warning:* A small number of people, some using counterweights, have reported cracked strap parts. None of them have used my clips, but I must remind everyone that as with all things on Thingiverse,*Use at your own risk.*

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

No

Resolution:

0.3 mm layers, 4 shells

Infill:

50%