This project requires a total of 12 prints. 4 top brackets, 4 bottom brackets, and 4 feets.
You will need the 3d printed parts, One 1x6x6' Board, One 1.25in x 6' dowel & a pack of #6 1/2" screws.
The 6 foot board is to be cut into a total of 6 pieces. 2: "sides" are to be 11in long and 4: “horizontal faces” are to be 12.5 in long.
The dowel is to be cut into 4 equal sections. Approximately 18 inches each
The project uses 20 #6 ½ in screws.
Time lapse: https://youtube.com/shorts/LvmXRotX4WA?feature=share
The author hasn't provided the model origin yet.