Dart holder 4 sets standing with drawer

Darts holder for 4 sets of darts.

I initially edited thing https://www.thingiverse.com/thing:4459821 and removed one set of darts as well as the mounting holes.

I added 2 foots so it can stand easily on a flat surface.

You can find it here: https://www.thingiverse.com/thing:4745360

But as I imported the original model into Fusion the surfaces were bad and i was told that a drawer for the dart tips is missing, so i recreated the stand based on the original design.

The drawer runs very smooth with my print settings and doues not touch the ground.

I uploaded also the fusion file for you to modify later if necessary.

Please use 10 % scaling in Cura and turn on the flat back-side of the model to achieve best bed adhesion and use minimal support structures.

If you like my work and want to support it you can do it here: 
https://paypal.me/sebastiandruckt

Print Settings

Printer Brand:

Creality

Printer: 

Ender 3

Rafts:

No

Supports: 

Yes

Resolution:

0.2

Infill: 

15

Filament: Geeetech PLA Black

Notes:

I used support at angles above 70°

Category: Sport & Outdoors