Concert Ukulele

This is a concert sized ukulele designed to be able to print on most prusa i3 sized printers. the split parts must be glued togeter, but most of the pieces fit together without a need for glue, however they do work better if glued in place. The neck is split into two pieces and the body has two variations. BodyB and faceB are used for both but the bodyA and faceA have both a symetrical and asymetrical version. Depending on your PLA the neck may warp with the tension of the strings, which is why there is a slot that a brace can be added. Supports are needed on the neck_main and the bridge. you may or may not need to sand the connections depending on your tolerances for your printer.

Print instructions

Category: Music Print Settings

Printer Brand: MK3s

Printer: Prusa i3