Hi, I made a simple magnetic chessboard and remixed the 1950 Dubrovnik chess set by.: https://cults3d.com/en/3d-model/game/chess-set-dubrovnik-1950
Works really nicely with 2x3mm magnets (superglued).
I recommend to print chess set from kinedix with resolution 0.12 for nicer look.
New design - The penultimate photo shows the printer clearance. The uploaded border is enlarged by 0,5 mm. - not tested. I also uploaded the old design that I used (here you need to shorten the last row of boxes by ~1mm).
TODO - box for board and chess
64x 2x3mm magnets for board
32x 2x3mm magnets for chess set
Superglue -ATTENTION! - as shown in the last photo, DO NOT stack the boxes after the magnet is glued on. (it makes those afwul white dots :( )
Rafts: No
Supports: No
Resolution: 0.12 chess set, 0.2 board
Infill: 20
Notes:
Print 32x white boxes and 32x black boxes and border. Glue them together with superglue.Pay attention to the correct colour order of the board.
Category: Chess
The author marked this model as their own original creation. Imported from Thingiverse.