Luci - Disenchantment (multi-material)

This is Luci from Disenchantment). He's a cute little cat like demon which inspired me to print him. This is my first attempt at remixing something for multi-color prints either on the well known Prusa MMU2.0 or Mosaic Palette. You could probably do this print on a dual color printer too if you swap out the grey to white after the base is done.

For the file attached the colors are as follows:
F1 - Black
F2 - Grey/Marble
F3 - White

Happy printing!

Print instructions

Category: Creatures Print Settings

Printer Brand: Prusa

Printer: i3 MK3 MMU 2

Rafts: No

Supports: Yes

Resolution: .15

Infill: 20%

Filament: Various PLA Grey/Marble, Black, White
Notes:

I kept the supports to a minimum threshold so there wouldn't be as much too remove. It doesn't need a lot, just enough for the obvious spots.

Luci shown in the images above was printed at 75% scale on the Prusa MK3 MMU 2.0.