Keystone Rj45 Jack

This is an add in RJ45 keystone connector for drop-in use inside an enclosure. It should however be printed at a slant so that the the overhangs will print properly and then no supports are required on the inside of the connector.

In your slicer turn it up on a corner with supports (touching build plate supports only). I would also suggest a BRIM to keep it secure on the build plate, so that all the features of a standard rj45 keystone jack will be correct. (See screenshot for example) Currently it has a slight gap in v5 and v6, but I am printing v7 now and will upload it once it has been verified to fit. Version 7 is verified to by a much closer fit to my version of the keystone rj45 connector. I will however leave the looser options up incase you have trouble getting the correct one to print.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

Yes

Resolution:

.26

Infill:

20

Filament: Obsidian 3D PLA-PRO White