This is for 40mm fan mounted at Einsy's door, blow directly to PCB.
The column is sized for Noctua NF-A4x10 40mm fan (hole spacing 32mm). If you use different fan, you might need to adjust the column slightly.
I use NF-A4x10 fan at 5V, and power directly from Einsy board's P3 port (pin1 for +5V, pin7 for GND).
Make sure you do some research before wiring!!!
Category: 3D PrintersThe author marked this model as their own original creation. Imported from Thingiverse.