Taig 5019CR mill stock column home sensor mount

This is home sensor mount for Taig Mill with stock column.

The proximity switch I used is Aotoro TS18-5DN (12-24VDC, NPN, Normal Closed).

I've my X table reversed, that's why the stepper motor is at the left-hand side.

For Z-axis You might want to use longer screw (10-32 UNF) so you can use hex nut to secure the mount from the back.

Update:

20191019: For Y-axis, put sensor up-side-down will help to avoid chip guard get caught between sensor and carriage. Photo updated (no change on model)