Hotend fan mount for Bondtech LGX with Slice Engineering Copperhead

Hot end fan mount for the Bondtech LGX with the Slice Engineering Copperhead for the LGX hot end. To be combined with the LGX part fan fan shroud that can be found at the website of Bondtech for free. Suitable for a 4010 hotend fan and a 5015 radial part fan.

Printed with ASA+, 0.1 mm layer height and no supports.

Material:

• 6 M3 thread inserts needed to mount both fans.
• 1 M2 thread insert needed to mount the part fan fan shroud to the mount.
• 4 short M3 screws and (lock)washers to mount the mount to the LGX
• 6 long M3 screws and (lock)washers to mount the fans
• 1 short M2 screw and (lock)washer to mount fan shroud
• 4 short M2 screws