Customizable Spool Bracket Shelf

Hi!

Here is the first Customizable Filament Spool Bracket to make a shelf about your favorite hobby, with your favorite color and favorite brand! 

(Did I mention that it will be your favorite new design to decorate your favorite home?)

Each shlef bracket is composed of 5 things:

• Bracket 
  • piece that will allow you to connect your wall with your shelf - that is… the aim of a bracket right…? The wall side is the one with a “W”, or a “M” depending of the orientation, but it was designed to be a “W”…

• Filament 
  • central piece of this model and will alow you to personalize your bracket. You can choose between a full roll, a third or half started roll. Ah shown on the pictures, you can add a bit of filament to make it more real!

• Left spool side 
  • you can choose between 3 differents, but others will come later if asked

• Right spool side (same as left exept for Prusa Spool Side)

• And that's it! (ok, that's only 4 things, but isn't it a good news?! :D)

Those different pieces are connected with 3mm x 2mm (sorry US users, I use metric system!), so you will need 12 of them to make 1 Filament Spool Bracket. You will need more if you want to pimp your bracket with several colors/shapes.

CAUTION: MAGNETS ARE NOT SUITABLE FOR KIDS, DON'T LET THEM PLAY WITH!

I hope you will like it, don't hesitate to tell me if something is missing or need changes. :)