Kestrel 5700 weathervane

This is a simple Weathervane for Kestrel 5700 Fully inspired by https://www.thingiverse.com/thing:2444368 changed to use cheaper and highly available materials.

Changes:

• Hole is designer for 6mm x 6mm stick (highly available in my area)
• Smaller bearing 608 2RS 8x22x7mm
• Clear tail without text
• Place for 10mm level

Supplies needed:

1x bearing 608 2RS 8x22x7mm

22cm slat 6mm x 6mm

1x hex nut 1/4 <= for tripod

Supports: 

No (v2 yes)

Resolution:

0,2

Infill: 

20

Post-Printing

After printing, I glue the bearing holder and paint everything. Then glue level and put everything together.

Category: Sport & Outdoors