Canopyrod handle for Schleicher Flugzeugbau ASK 13

Knob for ASK13 canopy. Required 4 times plus one M6 (selflocking-)nut and washer each.

Picture 2 shows a testprint... the rod should be covered, too.

Print Settings

Printer Brand:

Anet

Printer:

A8

Rafts:

Doesn't Matter

Supports:

Yes

Resolution:

0.2

Infill:

10%

Filament: NuNus PETG translucent red Post-Printing =============

Printed as arranged in STL, just remove the support an xou are good to go.

The M6 nut goes tight and snug into the the hex hole. (small hammer) the washer goes onto the canpys rod. I heated up he washer with a flame and screwed the knob on to weld the washer with the knob.