Jeep CJ Front Parking Light Lens, Housing and Gasket

Update! I designed a new lens with no ribs and thicker in the center to make room for 3mm of infill for something like honeycomb for a cool effect when lit.

I first designed the lens to fit the original CJ metal parking light housings. Then when I realized the stock bulb holders wouldn't properly hold the LED bulbs, I designed a housing that would use plastic bulb holders available on Amazon. I used these https://www.amazon.com/gp/product/B071KQK65D/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=3rdpig-20&linkId=629c460dc99e647dacce3eae03b258ed&language=en_US but any that fits the hole should work.

For best results print the lens open side up with no support and the housing open side down with support. I used transparent white ABS for the lens, and black ABS for the housings.