Raspberry Pi 400 2020 Mount

This mount is for mounting a Raspberry Pi 400 to 2020 series extrusions. All IO is still accessible, assuming normal-ish sized cable ends.

Parts List, Socket Head or Button Head for any screw is fine:

2x M3x30

2x M3x12

4x M3 Heat Set Threaded Inserts

2x M5 T-nuts (any kind is fine)

2x M5x15, M5x20 OR M5x25: 15mm no spacer, 20mm 6mm spacer, 25mm 9mm spacer

You'll have to find the correct M5 screw size for you're setup when using different spacers,

Since spacers to not span across the slot of 2020, do not crank down on the M5 mounting screws.

Spacers are mainly meant to clear the side panels on a Voron.

Printed in Zyltech White ABS

PRINT SETTINGS

No supports

0.2mm layer height recommended

4-5 shells

20% infill