4-inch Coupler for SawStop PCS and Dust Right Quick Connect

This is a coupler for a SawStop Professional (PCS) cabinet saw.  It adapts the dust collection outlet on the cabinet to the Rockler Dust Right® 4" Quick Connect since they are not quite the same diameter.

I print this as completely solid with wall perimeters set to 4 in Cura.  It has held up just fine for a few months.

Print Settings

Printer: Ender 3 Pro w/ direct drive

Rafts: No

Supports: No

Resolution: 0.15-0.2mm

Infill: 100%

Shells: 4

Material: PLA+ or PETG

Notes:

This prints fastest if you just print it as shells. This should be 4 walls on a .4mm nozzle since this is 3.2mm thick.