Small bin/container

I needed a shorter version of the plain recycle bin design, so this is that.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

No

Supports:

No

Resolution:

0.28

Infill:

20%

Filament: CC DIY PLA Blue

Notes:

Rotate the model in your slicer if it's sideways, the base of the container/bin should be on the build plate. The walls are thin enough that I found it's faster to just print 20% infill, and increase the wall count to 3 (or whatever looks good in your slicer). The base should be fine with the 20% infill and the walls should be 5 lines thick at 0.28 resolution.