Numpad Case and Plate with Underglow

I set about building a numpad because the files I could find weren't quite fitting. I have printed and tested both the sideways switch and the regular switch models and they fit the PCBs I have, but your mileage may vary depending on your PCB.

Here is one of the PCBs I'm using: https://www.aliexpress.com/item/32916152785.html

There are cutouts depending on whether your USB port is above or below the PCB, as well as a bottom panel that can have a cutout as well.

The feet are designed to use 1cm bumpons, available here: https://www.amazon.com/Clear-Close-Drawer-Cabinet-Bumpers/dp/B06XCGM8JT/ref=sr_1_2

And finally it's all held together with (4) M2x12mm screws, I got mine here: https://www.amazon.com/gp/product/B07W5HBRMP/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

I hope you enjoy the numpad, please don't hesitate if you have any questions!

Print Settings

Printer Brand:

TEVO

Printer:

Rafts:

No

Supports:

Resolution:

0.20mm

Infill:

Filament: Overture PLA Black