Ford Flathead V8 Cam Bearing Reamer

Reaming the holes for the camshaft bearings is almost impossible without something like this. There's a slot down the length of the shaft to hold the sandpaper. I used 240 grit and got a perfect fit in just a few minutes.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

No

Supports:

No

Resolution:

.28

Infill:

50

Filament: 3DFilles PLA+ Black

Notes:

Use a wide brim so the thing doesn't fall over. I did 20mm and it was fine. There's also a hole in the top to screw an M3 x 30mm bolt to strengthen the hex shaft that goes into the drill.