4 inch bubble wand

This was made for my niece who love playing with bubbles. The bubbles it makes regularly exceed a foot in diameter. It seems to work best when waved in the air.

The wand measures 100mm wide (about 4"). The bowl has a pour spout to make it easier to pour the remaining solution back into the bottle.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

Yes

Supports:

Yes

Resolution:

0.16 - 0.2

Infill:

15+

Filament: Inland PLA Any

Notes:

The wand should be printed with a raft since the comb may have issues adhering to the print bed. I printed with 12.5% support on Cura for the handle.

Tip - In Cura the default raft margins are absolutely ridiculous at 15mm. Reset them to 3-5mm to waste less plastic and cut down print times.

The bowl didn't need any support or raft. The lettering turned out fine without support.

I used 15% infill with 3 perimeters with 0.4mm nozzle (1.2mm) for both items.