1/144 enclosed display base gunpla

This is a 1/144 enclosed display base for gunpla. This was an simple idea I had but some part that I was hoping to do with it did not work out, so I will put it up here and come back and see if there's anything i can do with this later.

to complete this you will need some clear PERSPEX

1X 210mm X 265mm X 3mm

2X 210mm X 185mm X 3mm (i would recommend this be mirrors as these are the back parts)

This is a WIP at this time as no test prints have been done, once a test print has been dome this will be removed, parts may not work and are subject to change, if any change happens I will leave a note in this part with the date.