Anti moisture silica gel container Fast Print

Anti-moisture silica gel container
Fast Print possible due to straight pattern.

In two versions.
Important, before the first assembly, a little grease the thread.
The silica gel should be larger than 2.0 mm because the holes are 2.0 mm.
Height 65 mm, with hygrometer lid.
Height with lid 52 m
Diameter 55 mm and 49 mm
Capacity for 70g silicate gel 
Printing time together (two parts) about 3 hours.

Layer Height. 0,12-0,28 how you want
Wall Line Count. 7
Top Layers. 4
Bottom Layers. 4
Infill Density 100 %

Print Settings

Rafts: No

Supports: No

Infill:100