1-Gang Patress Box Spacer

This is a spacer for a 1-Gang Patress box. There's a 2-gang version lurking here: https://www.thingiverse.com/thing:2862775

I was fitting some controlled light switches (Sonoff T4: https://www.itead.cc/sonoff-t4eu1c-wi-fi-smart-single-wire-wall-switch.html) and a couple of my patress boxes were too shallow; hence the need for a spacer (easier than chopping out the brick or plasterboard for a deeper patress box).

Yes, I know you can buy these for not-a-lot from a DIY store but I wanted black and they're not so freely available and I needed, not so easily available, 20mm deep ones for the switches I was fitting to UK standard shallow light switch boxes.

I've included the Fusion 360 design so you can tweak it to suit.

I've uploaded 10, 15 and 20mm versions as stl files.

Print Settings

Printer Brand:

LulzBot

Printer:

TAZ 6

Rafts:

Doesn't Matter

Supports:

No

Infill:

20% or more