The Lionel - A Vintage 60% Tray-Mount Case Based on the Commodore 64

This is a tray-mount case for 60% keyboards based on the Commodore 64. I call it the Lionel because it's a fraction of the size of a full Commodore 64.

It is a remix of two models:

• Commodore 64 model https://www.threeding.com/3d-printing-models/commodore-64 by Allison Hubert.
• KeyBoard Case for Mechanical KeyBoard (Pok3r, GH60, Satan) by MaxWinterstein.

(See "Remixed From" section in the sidebar to the left for additional information.)

It should fit 60% PCBs with the standard GH60 standoffs. If you have a 60% PCB with non-standard standoff positions, you will need to alter this model's standoffs.

I originally wanted to add the top grille, but couldn't because of build plate size restrictions. (My da Vinci Nano only has a build plate size of 12 cm x 12 cm.)

Print Settings

Printer Brand:

XYZprinting

Printer:

da Vinci nano

Rafts:

No

Supports:

Yes

Resolution:

200 microns

Infill:

10%

Filament: XYZPrinting PLA White

Notes:

Supports are needed for the USB cutout.