LED Holders (configurable)

This LED holder accepts an aluminum L-profile into its configurable circular hole. The profile can be turned inside the hole so you can aim the light of an LED strip glued to the inside of the profile.

This is an improved parametric version of the non-configurable first one I built in Cinema4D.

Print Settings

Printer:

TronXY X5S

Rafts:

Doesn't Matter

Supports:

Doesn't Matter

Resolution:

0.3mm layer, 0.6mm nozzle

Infill:

10%

Notes:

You may need to adjust the XY compensation in your slicer (or increase the hole size) - or sand the LED profile hole a bit larger if it‘s too tight.