Ortur Laser Master 2 Adjustable Z with NEJE Mount

Can mount stock Ortur laser or mount a NEJE mount directly.

Has a full 50mm of travel

Has mounting hole access so it can be pe-assembled before mounting laser.

You will save 10-15mm of Y-travel over the Ortur Z-Lift assembly add-on.

If you mount a NEJE laser module you will need to lengthen the wires to the Y-Axis limit

switch, and adjust accordingly.

There is an Optional NEJE Controller Board Enclosure that can be mouted to the base.

A drop of CA glue was used on the Knurled Thumb Nut and retainer so they would spin freely (after assembly).

I printed on a Prusa MK3S using .15mm Quality Settings

Perimeteres: 3

Infill: 30%

Infill Pattern: Grid

Top & Bottom Solid Layers: 4

Parts:

100mm M6 Threaded Rods https://www.amazon.com/gp/product/B01LY0L7Q7/ref=ppx_yo_dt_b_asin_title_o03_s01?ie=UTF8&psc=1

M6 Barrel Nuts https://www.amazon.com/gp/product/B00KRY0AS6/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

No

Resolution:

.15

Infill:

30%

Filament: eSun PLA+

Notes:

Alternately you could use something like this;
M6 Furniture Bolt Set [https://www.amazon.com/dp/B01MS80URX?psc=1&ref=ppx\_yo2\_dt\_b\_product\_details](https://www.amazon.com/dp/B01MS80URX?psc=1&ref=ppx_yo2_dt_b_product_details&tag=thingiverse09-20)

You could also use an M6 Knurl Thumb Screw instead of the printed part https://www.amazon.com/gp/product/B07LFRWD7B/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1