Print in Place Planter with Drainage and Dish

A print in place planter/plant pot with drainage and integrated dish. The upper inner radius of the pot planter is approx 100 mm, but the planter is scaleable to a degree.

The cone at the bottom of the planter drains water towards the outside of the bottom radius, where the water drains via many small channels into the dish, where it can evaporate. This design allows the planter to be printed upright as one piece with no supports.

The images of the plant and it's design is slightly outdated, but the STLs are the latest.

If you print this instead of buying a planter, please consider sending a tip my way :).

Category: Outdoor & Garden