Coin coaster Euro 2

Realistic Euro 2 coin as a coaster

This is a replica of an Euro 2 coin for use as a coaster. The diameter is 10.1 cm (3.9 inches).

You can use any filament color which you like for the Euro 2 coaster. The original color of the Euro 2 coin is a gold color called "Nordic Gold" for the inner part and a silver color for the outer part.

Let the design of each object to be the upper side on your printer's build plate. The flat side is at the bottom. All STLs are already in the correct orientation.

The Euro 2 coin comes in 3 flavours.

Coin type A

Coin coaster with top design and flat bottom side with 3 holes for the rubber stoppers on the bottom side. This design is printed in two steps. Print the inner part in a gold color. Print the outer part in a silver color. The parts must be glued together after the print

Of course you can use the coin as a coaster also without the rubber stoppers.

Download the following objects for this type of coin:

Euro 2 inner A V1.stl -> print in gold color

Euro 2 outer A V1.stl -> print in silver color

Glue all 2 objects together to form the coin shown on the pictures.

Coin type B

Coin coaster with top and bottom design. There are 3 holes for the rubber stoppers on the outer part of the bottom side. The print consists of the top and bottom inner and outer parts separate. The parts must be glued together after the print with the flat sides facing each other. Of course you can use the coin as a coaster also without the rubber stoppers.

Download the following objects for this type of coin:

Euro 2 btm inner B V1.stl -> print in gold color

Euro 2 top inner B V1.stl -> print in gold color

Euro 2 btm outer B V1.stl -> print in silver color

Euro 2 top outer B V1.stl -> print in silver color

Glue all 4 objects together to form the coin shown on the pictures.

Coin type C

Pure coin with top and bottom design without any holes on the bottom part. The print consists of the top and bottom inner and outer parts separate. The parts must be glued together after the print with the flat sides facing each other.

Download the following objects for this type of coin:

Euro 2 btm inner C V1.stl -> print in gold color

Euro 2 top inner C V1.stl -> print in gold color

Euro 2 btm outer C V1.stl -> print in silver color

Euro 2 top outer C V1.stl -> print in silver color

Glue all 4 objects together to form the coin shown on the pictures.

Enjoy printing these items.

Print Settings

Printer:

FLSUN Super Racer

Rafts:

No

Supports:

No

Resolution:

0.2 mm initial layer, 0.2 mm layer height

Infill:

20 %

Filament:

MKOEM, TINMORRY PLA

Silk Light Gold, Silk silver

Notes:

Nozzle not larger than 0.4 mm to print the fine details.

Post-Printing =============

Glue round rubber or foam sheets (optional)

You may want to glue 3 round 10 mm (0.4 inches) rubber or foam sheets with 2.5 mm thickness to the bottom holes of coin A and B. This will make the coaster sit on the table in a stable way.

How I Designed This ===================

Coin design

The coin was designed with Blender. I have designed the flat base coin first. Using a reference photo I have extruded points to match the text and ornaments on the top surface. Due to the inner and outer part this was quite complicated to design. I have used lots of booleans in Blender.

Category: Coins & Badges