Geeetech Prusa i3 Pro B - Z endstop lifter

Hi friends.

I changed my original hotend and replaced it with an e3dv6. But the e3dv6 is longer than the original. Then I made a new Z endstop to avoid the perforation of the bed :)

I made this little thing that lifts the original endstop sensor of 3cm.

I printed it at 40% infill to be sure of stability.

I kept the orginal screws to fix de sensor on the object because the original screws are M2.5. I used M3x16mm for the base.

Print Settings

Printer Brand:

Prusa

Printer:

Supports:

Yes

Infill: