Tiny3DMaker

I wanted a small printer that was easier to carry with me, when i go somewhere i might need to print something. Here is a video of it printing https://youtu.be/C41nArldG2I

print area is 100x100x100 mm

i knew it was gona have an china copy of the e3d v6 hotend so i started to design it out from that. i had some 4 mm acrylic already so i designed it to be lasercut from that.

there will not be any instructions on how to assemble it, but there is a file for the program Designspark Mechanical where it was made, you ca use to see how it was put together.

there is also be a parts list that is mostly complete. i have also included the firmware i made for it.

total cost for the parts on the printer is about 1000 DKK (164 USD, 135 EUR)

you will need acces to a laser cutter and a 3dprinter to build this.

If you make it plzz be sure to add the 3dprintet part on the front with Tiny3DMaker in any color you like, and make a make on this thing.

This is released as non-Commercial plzz respect that, if you want to make and sell it contact me directly.