LOKI Keyring

Designed this for my child as they are looking forward to the new TV show.

I printed it standing up at 0.08mm layer height. It took about 1 and a half hour to print.

Print Settings

Printer:

Geeetech A10M

Rafts:

No

Supports:

No

Resolution:

80

Infill:

10

Filament:

Allegedly "Gold"/ Light Brown How I Designed This ===================

I use https://convertio.co/jpg-svg/

And windows photo editor to make an SVG from a PNG I found on Google. Then imported it into Tinkercad to add the backing and hole for the Keyring. Using Prusa slicer I oriented the STL to stand on the bottom edge and slicer at 0.08mm using a 5mm brim.