Groove Mount Adapter for Titan Extruder

This collection includes files for 4 different Groove Mount Adapters for the E3D Titan Extruder.

One that is threaded for M10 fittings, one that's threaded for M6 fittings, one that is not threaded for direct drive applications that need the clearnance, and one that has a threaded bit on the end for screwing into some clone E3D Heatsinks (Like that on the CR10 V2 and V3).

Print with at least 0.15mm layer height if not finer

I designed these models to be able to print them with minimal over hangs and no support material. Using support material will likely cause the adapters to no longer fit.

Also make sure your horizontal expantion is tuned in or the threads will not work. I fined -0.1mm to be enough for threads.

Print with like 3 or 4 walls and infill shouldn't matter
Print with the threaded end pointing up and it won't need supports