Quadruple Disc Enclosure with 120 fan Case

A practical 3.5inch disc enclosure

When building my NAS extension I wanted an easy way to extend capacity while maintaining

the external option, having the discs together with a fixed fan mounting point makes it easy to put the box anywhere I want within reach of the (longer) Sata cables

I printed them in PLA on the Prusa I3MKS3 at 100mm/s , print times around 12 hrs, no support needed.

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

No

Resolution:

200

Infill:

10

Filament: any PLA any

Notes:

print as fast as you want, I used 2 walls, 3 top and bottom

if you print on the right hand side (end of the enclosure when sliding in the discs) you will not need supports

Post-Printing

if stringing occurs, either cut or blow away

Category: Computer