Non-Wago Connector block
This is not really a remix as I made it from scratch but was inspired by the "Wago 221 Power-Rail" by hedwig. This is…
86
265
5
2062
updated
April 30, 2022
Description
PDFThis is not really a remix as I made it from scratch but was inspired by the "Wago 221 Power-Rail" byhedwig. This is to fit the cheap Chinese Wago "knock off" versions available from Aliexpress. it is just a 3 way one only as that is what I needed.
I have also added a cable tie from below. (It needs to be quite a fine cable tie but it fits the ones I had.
Print Settings
Printer:
Ratrig V-core 3 300
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2mm
Infill:
20%
Filament:
Generic PLA+Black
Notes:
I don't really think it matters what material this is printed in as it is for indoor use only and does not come under any stress.
Tags
Model origin
The author marked this model as their own original creation. Imported from Thingiverse.